Name:

Contact:

Company:

Email:

Comments:


The tester is used to measure the rise / increment of the temperature of various parts / components of the device under test when subjected to rated electrical parameters

Temperature Rise Test Panel

Lab Test

SCR ELEKTRONIKS have developed TEMPERATURE RISE TEST PANEL to carry out temperature rise test for low voltage switchgear items. It consists of True RMS constant Current source, which maintains the Current with + / - 1 % of set value with Digital indication, Digital Temperature indicator having twelve channels for temperature measurement. Cr/Al' types of thermocouple sensors are used for temperature sensing. Digital voltmeter used to indicate position of autotransformer.

Variable AC Constant Voltage Source 150V to 310V @ 1A max.

Auto/Manual selection for voltage control. Adjustment of voltage with potmeter in Auto mode and with switch in manual mode.

Digital Multi Function Meter to read voltage, current, wattage and p.f. Of LED Luminaire.

Digital Temperature Indicator 0 to 200° C for 'J' Type thermocouple sensor 6 channel switch selectable.

'J' Type Thermocouple Sensors Tefflon coated bid type junction 2 meter long – 6 Nos.

Output ON/OFF with Push Buttons and Relays.

MCB's for Input and Output.

M.S. Fabricated Panel duly powder coated Table Top Model.

Input Supply: 230V, 6A Max. AC + / - 10%, 60Hz

Output: Current Source 0 to 100A max

Digital Voltmeter: 3-1/2 Digit, 0 to 300V

Digital Temperature Indicator: 3-1/2 Digits, 12 channels, range – 0 to 200 °C

Digital Ammeter : 0 to 1.000A count of CT Range.

CT range selection for accurate current measurements

The tester can be customized as per the voltage and current value of the source, as well as number of temperature channels can be customized. The tester can be PC based or otherwise, depending upon the customer preference.

The tester is used to measure the rise / increment of the temperature of various parts / components of the device under test when subjected to rated electrical parameters.

Products from same category

The product is designed to test all the relevant safety and performance tests of the LED and its components. It is equipped with output terminal plates for all the three components - LED driver, lighting PCB and complete LED luminaire
PC Based Comprehensive Test Set Up For Luminaires
A time saver, the PC based test setup for LED luminaires has separate terminals to connect the LED PCB, LED Driver and final luminaire
PC-Based-Test-Setup-for-LED-Driver-with-Servo-Controlled-Source
The test equipment is a solution for manufacturers & OEMs to test the LED assembly (that is fitted inside LED Luminary for illumination) on manufacturing line.
PC-Based-Safety-Test-Panel-for-LED-Luminaire-with-Solid-State-Source
The tester helps for assessing the safety and measurement parameters of the LED luminaire MCPCB
PC Based Test Setup for LED PCB of Luminaire
This innovative machine is used to test the driver one by one. The 4+4 LED driver test panel gets automatically cut off at high voltage
4+4 Led Driver Test Panel
This is SCR Elektronik's single phase impulse winding tester
Impulse-Tester-10,700mfd
The Glow Wire Test Apparatus is designed with goal of improved repeatability of test results and ease of operation
Glow-Wire-Test-Apparatus-GWT-A2
The product tests the susceptibility of the insulation material against piercing metallic parts when subjected to fire
Needle-Flame-Test-Apparatus
This High Voltage Tester can be used to test the voltage in LED equipments
High-Voltage-Tester-5kV
The tester is used to measure the voltage drop of the earthing circuit at a constant current - thus assessing how well the product eart is 'bounded' to the system earthing
Earth Contact Resistance
The tester is used to assess the effect of ball pressure typically on insulator surfaces in a hot environment
Ball-Pressure-Test-Apparatus
The product is used to test switchgears, wiring accessories and domestic appliances against electric shock during human handling
Test Finger Apparatus