Name:

Contact:

Company:

Email:

Comments:


The product is helpful in conducting all of the electrical type tests mentioned in one go

Sensitivity Test Bench For RCCB (IEC 61008–1 clauses 9.9.2.1, 9.9.2.2, 9.9.2.3, 9.15, 9.16 of RCCB & IS 12640)

Lab Test

SCR ELEKTRONIKS has developed SENSITIVITY TEST BENCH FOR RCCB. This panel is used to perform Verification of the operating characteristic test as per IEC 61008-1clause no.9.9.2.1, 9.9.2.2, 9.9.2.3, 9.9.2.4, Verification of trip free mechanism test as per IEC 61008-1 clause no.9.15 and Verification of the operation of test device at the limits of rated voltage test as per IEC 61008-1 clause no.9.16. The test bench is designed with state –of-art Technology and to test entire range of RCCB/RCBO as per IEC 61008-1, IEC 61009-1.

Sequential / Individual Testing possible

All in one solution

Dynamic fixture (optional) available for testing RCCBs of various frame sizes

Test Stand for ease of use / connection with 500 A sourcing busbars

Inbuilt load bank for alpha angle setting - fine resolution

Good low cost option for type

Input: Default is 230 V AC +\- 10 %; specify while ordering.

Leakage Current Ranges: 10mA, 30mA, 50mA, 100mA ,300mA & 500mA.

Current Adjustment: a) Between 10mA to 2500mA at 230V AC, Coarse with Switching and Fine with Toropot. b) Servo Controlled 0 to 500Amps at 20V. (10Amp to 125Amp Continuous).

Current Measurement: a) Digital mAmps Meter, 3 ½ Digit, 2 ranges. b) Transient Signal Recording Meter

Time Measurement: 5 Digit a) 0 to 99.999 Sec.

Protection: Through MCB

The system can be customized for RCCB / RCBO / e RCBO or two or all of the above. Plus, tests can be selected or dropped to get an exact solution. Also the system is available in manual + semi automatic mode as also fully automatic PC based mode.

The product is helpful in conducting all of the electrical type tests mentioned in one go. The user has to simply connect the RCCB / RCBO and conduct tests one after another. This is an ideal bench for producton houses willing to test RCCBs on a samples per batch basis as also for coomercial test labs keen to issue compliance certificates as per BIS / IEC / other norms.

Products from same category

The PC based Test Bench for RCCB can handle almost all of electrical tests to be performed for both A type and AC type RCCBs
Type test bench for RCCB
The test is helpful in conducting both the rated current endurance and leakage current endurance, robustness and repeatability
3-Phase-RCCB-and-RCBO-Endurance-Test-Bench
The test, similar to that of an MCB, is carried out to measure the power loss across each pole
TEMP-RISE-AND-POWER-LOSS-TEST
The product is used to conduct 28 days test and temperature rise of the parts of a Circuit Breaker
3-Phase-28-Days-Temp-Rise-Test
The vast machine can be used for carrying out Routine Tests namely, “Tripping Test” and “Performance of the Test Device Test”
Automatic-Routine-Test-Setup-for-RCCB
The test is conducted to asses the dielectric withstand capacity of an RCCB for various insulation paths - between the body and trminals, adjacent terminals and opposite terminals
HV-Test-Setup-for-RCCB
This is a portable test set up for demonstrating the operational characteristics of a residual current device
Demonstration-Trip-Verification-or-Briefcase-for-RCCB
The equipment is a fully automatic one to test all the routine tests of RCCB in one go
PC-Based-Routine-Test-of-RCCB-RCBO
The test bench is designed to calibrate the PMR used in an RCCB / RCBO to make it trip within an exact zone of tripping
RCCB-Mag-Demag