The product tests the susceptibility of mechanical tripping of an MCB against repeated mechanical shocks induced by the equipment

Shock Test Apparatus (IS 8828, IEC 60898 )

Lab Test

SCR Elektroniks make Shock test Apparatus is used to test the Electrical accessories / appliances for their mechanical strength. A wooden base fixed to a concrete block and a wooden platform is hinged base. This platform carries a wooden board, which can be fixed at various distance from the hinge and two vertical positions. The end of board bears a metal stop plate, which rests on coiled spring having constant 25N/mm.

The circuit breaker is secured to the vertical board in such a way that the distance of horizontal axis of the sample is 180 mm from the platform the vertical board being in, so fixed that the distance of the mounting surface is 200 mm from the hinge.

On the surface, opposite the mounting surface of the circuit breaker, a supplement mass is fixed so that the static force on the metal stop – plate is 25 N in order to ensure that the moment of inertia of the complete system is substantially constant.

Products from same category

The tester is used to assess the effect of ball pressure typically on insulator surfaces in a hot environment
Ball Pressure Test Apparatus
The product is used to test switchgears, wiring accessories and domestic appliances against electric shock during human handling
Test Finger Apparatus
Cord Grip Test Apparatus can be used or testing effectiveness of the retention in flexible cables
Cord Grip Test Apparatus
The tester is used to test the mechanical strength against impact
Impact-Test-Apparatus
The Spring Operated Impact Hammer simulates mechanical impact to electronic products and electrical appliances
Spring-Hammer-Impact
The test bench is used to asssess any possible damage arising out of falling inside the barrel for a pre-set amount of time and revolutions
Tumbling-Barrel-Test-Apparatus