Name:

Contact:

Company:

Email:

Comments:


The mixer, as it comes in direct contact with the person, makes the tests an absolute must for the manufacturing company to enhance the reaibility and brand value

Safety Test Panel for Mixer(IS 302)

Routine Test

SCR ELEKTRONIKS introduces Safety Test Panel for Domestic Mixer with PC Datalogging. The tests are Performed as Prescribed in IS the Panel Carries out different tests one by one and provides indication of the Test results as OK or NOT-OK. It is very useful and handy in line testing on Mass production line as well as type Testing. Special fixture can be provided for the specific product. This avoids the connections & disconnections of the product for different tests. The total time for entire testing is less than 20 seconds. Micro controller based sequential timer maintains the sequence of operation and displays the test status. This manual contains information about operating instructions and maintenance of the equipment. Please go through this manual carefully and retain it for future reference.

Adjustable High Voltage, 0 to 2 KV for HV test.

Parameter limits setting for different tests.

Digital meters: 3 ½ digit for all the tests to indicate different parameters.

Leakage Current checked for both the polarities.

Individual / All Tests mode selection.

Micro-Controller based Digital Sequential Timer to carry out the tests automatically.

Selector switches and Push Buttons to adjust test parameters.

Lamps to indicate test results namely: OK and NOT OK.

TEST FAIL indication with Alarm, if Fault is detected & TEST PASS indication at the end of the tests.

PC Connectivity through USB port provided for data logging on PC.

PC Based, interfaced with Labview based Testware SCADA.

The Test Panel broadly comprises of:Mains ON MCB for switching ON the input supply

Indicator Lamps for TEST ON, OK, NOT OK, HT ON, Individual, ALL Tests, TEST Fail.

Programmable Timer for controlling and carrying out all the tests automatically in ALL tests mode of operation. Different parameters can be set through the keypad provided on this unit. For details on programming of Timer please refer the Timer manual provided in the Next section.

Select Test Switch for selecting the Individual / All Test Mode of operation.

START Test Push Button to start the Test Process

STOP Test Push Button is used to stop the test when required.

Reset pushbutton to reset the conditions before starting a new test.

Output Terminals for connecting the product to be tested and is present on the right hand side of the panel.

The test bench can be cutomized as per various user defined parameters such as high voltage and corresponding leakage current, constant current for earth contact, insulation resistance range as well as range of voltage and current.

The tester tests various safety tests of the domestic appliance and ensures safety to the end user (consumer) before being shipped. The mixer, as it comes in direct contact with the person, makes the tests an absolute must for the manufacturing company to enhance the reaibility and brand value.

Products from same category

TEST SETUP FOR AIR CONDITIONER
Test Setup For Air Conditioner
It is used for carrying out Performance Test, Earth Contact Resistance Test, High Voltage Test, Megger Test and Leakage Current Test
Safety Test Panel for Air Conditioner
The tester tests various safety tests of the domestic appliance and ensures safety to the end user before being shipped
Safety Test Panel for for Cooler
The tester tests various safety tests of the domestic appliance and ensures safety to the end user (consumer) before being shipped
Safety Test Panel for Geyser
The tester tests various safety tests of the domestic appliance. It also ensures quality and reliability of the appliance
Safety Test Panel for Luminaire Fixture