Name:

Contact:

Company:

Email:

Comments:


The test is conducted to asses the dielectric withstand capacity of an RCCB for various insulation paths - between the body and trminals, adjacent terminals and opposite terminals

Test Set Up of High Voltage Test For RCCB(IEC 61008 Clause 9.7.3)

Routine Test

This HV Tester is unique in the fact that it is provided with an indigenously designed fixture to RCCB with the facility to test the di electric strength between:
Test 1:- HV apply across terminals
Test 2:- HV apply between terminals of adjacent poles.
Test 3: HV apply between terminals of all poles and enclosures.

Safety Features: a) Zero Interlock b) Epoxy cast Transformer

Zero Interlock bypass facility, timer bypass facility.

Input Supply : 230 V AC, +/- 10 %, 50 Hz.

Test Voltage : 0 – 3 KV AC.

Tripping : 200 mA.

Time Setting : 0 - 60 Sec.

Safety Features : Fixture Cover Interlock Epoxy cast Transformer

Lamp Indication : HT ON, OK, NOT OK (fault), Test Over,Test 1, Test 2, Test 3, Low Voltage, Low Current

Fuse : 3 A AND 5 A current ratings.

The test is conducted to asses the dielectric withstand capacity of an RCCB for various insulation paths - between the body and trminals, adjacent terminals and opposite terminals, etc. The settable maximum allowable leakage current allows the user to compare RCCB prototypes and subject the RCCB to harsher conditions than in real world.

Products from same category

The PC based Test Bench for RCCB can handle almost all of electrical tests to be performed for both A type and AC type RCCBs
Type test bench for RCCB
The product is helpful in conducting all of the electrical type tests mentioned in one go
Sensitivity-Test-Bench-for-RCCB
The test is helpful in conducting both the rated current endurance and leakage current endurance, robustness and repeatability
3-Phase-RCCB-and-RCBO-Endurance-Test-Bench
The test, similar to that of an MCB, is carried out to measure the power loss across each pole
TEMP-RISE-AND-POWER-LOSS-TEST
The product is used to conduct 28 days test and temperature rise of the parts of a Circuit Breaker
3-Phase-28-Days-Temp-Rise-Test
The vast machine can be used for carrying out Routine Tests namely, “Tripping Test” and “Performance of the Test Device Test”
Automatic-Routine-Test-Setup-for-RCCB
This is a portable test set up for demonstrating the operational characteristics of a residual current device
Demonstration-Trip-Verification-or-Briefcase-for-RCCB
The equipment is a fully automatic one to test all the routine tests of RCCB in one go
PC-Based-Routine-Test-of-RCCB-RCBO
The test bench is designed to calibrate the PMR used in an RCCB / RCBO to make it trip within an exact zone of tripping
RCCB-Mag-Demag