Name:

Contact:

Company:

Email:

Comments:


The product tests the susceptibility of the insulation material against piercing metallic parts when subjected to fire

Needle Flame Test Apparatus (IEC 60695-11-5)

Lab Test

Needle Flame Test Apparatus is designed to carry out fire hazard testing. Flammability test is to check the ‘Resistance to Fire’ of electrical insulators that touch directly conducting parts & also parts of insulators. Testing with regard to fire hazards can be done by creating exactly the conditions occurring in practice. However, this is not possible in most instances. Hence for this test, the actual conditions are simulated as closely as possible by the Needle Flame Test Apparatus.

PLC to control the sequence of operation and display the Test Results.

Ball Screw Type sliding mechanism for vertical and horizontal movement.

Enclosure with 0.5 cubic meter internal volume.

Bunsens Burner with 9 to 10 mm diameter with regulator and needle flame diameter 0.5.

Test time for temperature to increase from 100° C +/- 5° C to 700° C +/- will be 23.5+/- 1 s.

Test time in second.

Draught Free Condition.

Observation of test from outside from mirror.

Chamber from inside should be dark.

Exhaust to remove product of combustion.

Timing device tolerance not more than 0.5s.

16 * 2 LCD Display for User interface.

Membrane keys for settings.

Programmable Total test time.

Temperature indicator for continuous monitoring and displaying sensor Temperature.

Lamps to indicate Flame position

TEST OVER indication with Alarm at the end of the tests.

The product is available in PC based or non PC based mode.

The product tests the susceptibility of the insulation material against piercing metallic parts when subjected to fire. The insulation sample under test may be examined later on and be subjected to more tests

Products from same category

The product is designed to test all the relevant safety and performance tests of the LED and its components. It is equipped with output terminal plates for all the three components - LED driver, lighting PCB and complete LED luminaire
PC Based Comprehensive Test Set Up For Luminaires
A time saver, the PC based test setup for LED luminaires has separate terminals to connect the LED PCB, LED Driver and final luminaire
PC-Based-Test-Setup-for-LED-Driver-with-Servo-Controlled-Source
The test equipment is a solution for manufacturers & OEMs to test the LED assembly (that is fitted inside LED Luminary for illumination) on manufacturing line.
PC-Based-Safety-Test-Panel-for-LED-Luminaire-with-Solid-State-Source
The tester helps for assessing the safety and measurement parameters of the LED luminaire MCPCB
PC Based Test Setup for LED PCB of Luminaire
This innovative machine is used to test the driver one by one. The 4+4 LED driver test panel gets automatically cut off at high voltage
4+4 Led Driver Test Panel
This is SCR Elektronik's single phase impulse winding tester
Impulse-Tester-10,700mfd
The Glow Wire Test Apparatus is designed with goal of improved repeatability of test results and ease of operation
Glow-Wire-Test-Apparatus-GWT-A2
This High Voltage Tester can be used to test the voltage in LED equipments
High-Voltage-Tester-5kV
The tester is used to measure the voltage drop of the earthing circuit at a constant current - thus assessing how well the product eart is 'bounded' to the system earthing
Earth Contact Resistance
The tester is used to measure the rise / increment of the temperature of various parts / components of the device under test when subjected to rated electrical parameters
Temperature-Rise-Test-Setup-for-LED1
The tester is used to assess the effect of ball pressure typically on insulator surfaces in a hot environment
Ball-Pressure-Test-Apparatus
The product is used to test switchgears, wiring accessories and domestic appliances against electric shock during human handling
Test Finger Apparatus