Name:

Contact:

Company:

Email:

Comments:


This product is used by leading MCB manufacturers on their lab & production floor

MCB Thermal + Magnetic Characteristic Test Bench (IEC 60898 Table 7)

Routine Test Lab Test

The test system is a special version of the thermal + Magnetic test test system. The single power source able to deliver either thermal or magnetic test parameters set on the PC by the user.

This test equipment also covers testing as per Indian Standard IS 8828 as well as Indonesian Standard SNI 8528-1 (BSN)

Input 415 V, 30 A (max), 3 phase, 50 Hz

Covers the entire range of MCB from 0.5 A to 125 A : B, C, D curve.

Thermal Test : User can set up to 4 times the rated current of MCB which includes 1.13 times rated current, 1.45 times rated current and 2.55 times rated current.

Magnetic Test : 0.5 – 125 A MCB : B, C ,D curve Short time duty (about 100 mS) is 3000 A, which covers the max 2500 A (125 A MCB : 20 times rated current for D curve MCB). The Test is done at low voltage.

Transient Recording Meter reads the instantaneous current and Trip time.

Current Transformer ranges – 1A, 2A, 5A, 10A, 25A, 50A, 100A, 200A , 500A , 1000A, 2000A & 3000A – selected automatically by the software on basis of chosen MCB rating. Output Current : 1. Continuous rating between 1 A to 600 Amps 2. Short time up to 3000 Amps

Micro Controller based unit & software controls the sequence of operation and measures time with 1 msec resolution (for magnetic / instantaneous tripping). Heavy Duty Contactors for internal switching as per PC based test sequence.

Separate three TIME INTERVAL METERS for each station

Swamping inductors / resistors for stable current

The product can be customized as per the number of stations: 1 (stand alone), 2, 4, 6, 8, 10 and 12 stations. Additionally, the product can be microccontroller based with each microcontroller controlling an individual station, or a PC based wherein the PC controls all the stations simultaneosuly and independenly of each other. The product is available as a standalone module with micro controller based control – without the use of PC as a low cost alternative with features as scalability and accuracy intact.

This product is used by leading MCB manufacturers on their Lab & production floor.

Products From Same Category

The MCB Thermal Trip Calibration Test Bench is a fully automatic stand alone equipment
4 Station Thermal & Calibration Test Bench
This is designed for Testing of MCB to carry out “Test of Instantaneous Tripping
MCB Magnetic (Instantaneous) Trip Test Bench
The 28 days Test Bench can work in single as well as three phase mode
3-Phase-28-Days Temp-Rise-Test
It is a programmable High Voltage Tester for MCB equipments
High-Voltager-Tester
The test bench tests mechanical and electrical endurance characteristics of MCB for quality assessment purposes
MCB Endurance Test Bench
The test is intended to check the instantaneous trip (magnetic trip mechanism) characteristics of an MCB as per its rating and curve at a conveniently low voltage
MCB-Instantaneous-Trip-Test-Bench
The test, similar to that of an MCB, is carried out to measure the power loss across each pole
MCB Temperature Rise and Power Loss Test Bench
The tester is used to carry out the 1.13 and 1.45 test, optionally inside a heated environment (temperature chamber)
MCB Tripping Current Characteristic Test Bench
The test bench is primarily designed to hold and connect multi pole MCBs for thermal verification
MCB-Thermal-Calibration-Verification-Test-Bench
Glow Wire Test Apparatus – GWT A2 (Automatic)
Glow Wire Test Apparatus – GWT A2 (Automatic)
The tester is used to simulate a particular impulse (1.2 / 50 microsecond) so as to assess the insulation characteristics of a breaker against a real world impulse experienced by the MCCB
Impulse Tester 10,700mfd
The product is used to measure the millivolt drop at a high dc voltage or to assess the micro-ohms of an MCB
millivolt drop tester