| 1 |
Input Supply |
Default: Three phase, 415V, 50Hz, +/- 10%, (40A max) |
Default: Three phase, 415V, 50Hz, +/- 10%, (40A max) |
Default: Three phase, 415V, 50Hz, +/- 10%, (100A max) |
| 2 |
Output Current Range |
50 to 3000A variable, settable and isolated from mains.
Two Ranges:
50 – 500A
100 – 3000A
|
50 to 5000A variable, controlled, settable and isolated from mains.
Two Ranges:
50 – 500A
100 – 5000A
|
100 to 10000A variable, controlled, settable and isolated from mains.
Two Ranges:
100 – 1000A
200 – 10000A
|
| 3 |
Output Current Setting |
150A to 3000A : 10ms.
<500A : 500ms.
|
150A to 5000A : 10ms.
<500A : 500ms.
|
200A to 10000A : 10ms.
<1000A : 500ms.
|
| 4 |
Compliance Voltage |
5V. |
7V. |
7V. |
| 5 |
Output Measurement |
Through Transient Recording Meter Facility is provided to connect an oscilloscope to measure and set the desired output current. Two ranges provided:
0 – 500mV for 0 – 500A O/P Tap
0 – 300mV for 0 – 3000A O/P Tap
|
Through Transient Recording Meter Facility is provided to connect an oscilloscope to measure and set the desired output current. Two ranges provided:
0 – 300mV for 0 – 500A O/P Tap
0 – 300mV for 0 – 5000A O/P Tap
|
Through Transient Recording Meter Facility is provided to connect an oscilloscope to measure and set the desired output current. Two ranges provided:
0 – 300mV for 0 – 1000A O/P Tap
0 – 300mV for 0 – 10000A O/P Tap
|
| 6 |
Time Setting |
10ms to 1000ms. |
10ms to 1000ms. |
10ms to 1000ms. |
| 7 |
Cycle Setting |
1 cycle / 99 cycles. |
1 cycle / 99 cycles. |
1 cycle / 99 cycles. |
|
Construction |
Variac & Panel on Castor Wheels |
Variac & Panel on Castor Wheels |
Variac & Panel on Castor Wheels |
| 8 |
Protection |
Fuse protection on primary
Electronic Over Current Protection in Primary Circuit.
Additional Time Limit for “Test ON” time.
|
Fuse protection on primary
Electronic Over Current Protection in Primary Circuit.
Additional Time Limit for “Test ON” time.
|
Fuse protection on primary
Electronic Over Current Protection in Primary Circuit.
Additional Time Limit for “Test ON” time.
|
| 9 |
Termination |
Output current termination on bus bars to facilitate easy connection with Energy Meter current circuit terminals. Three bus bar, Common, 500A & 3000A are provided. |
Output current termination on bus bars to facilitate easy connection with Energy Meter current circuit terminals. Three bus bar, Common, 500A & 5000A are provided. |
Output current termination on bus bars to facilitate easy connection with Energy Meter current circuit terminals. Three bus bar, Common, 1000A & 10000A are provided. |
| 10 |
Current Sensing |
Through Shunt:
0 – 500mV for 0 – 500A Output.
0 – 300mV for 0 – 3000A Output.
|
Through Shunt:
0 – 300mV for 0 – 500A Output.
0 – 300mV for 0 – 5000A Output.
|
Through Shunt:
0 – 300mV for 0 – 1000A Output.
0 – 300mV for 0 – 10000A Output.
|
