The Glow Wire Test Apparatus is designed with goal of improved repeatability of test results and ease of operation

Glow Wire Test Apparatus (IEC 60695-2-10 2000-10. This test is also referred in many other standards such as IS 11000, IS 3854 : 1997 / IS 1293 :1988 / IS 371 :1999 & IS 11000 Pt 2 Sec 1, IEC 60335, IEC 884/94, IEC 60598, IEC 61058, BS 6458, BS EN 60695–2-10,11,12.)

Lab Test Routine Test

GLOW WIRE TESTER (also known as Glow Wire Test Apparatus) is designed to carry out fire hazard testing as specified in IEC 60695-2-10 2000-10. Flammability test is to check the ‘Resistance to Fire’ of electrical insulators that touch directly conducting parts & also parts of insulators. This test is also referred in many other standards such as IS 11000, IS 3854 : 1997 / IS 1293 :1988 / IS 371 :1999 & IS 11000 Pt 2 Sec 1, IEC 60335, IEC 884/94, IEC 60598, IEC 61058, BS 6458, BS EN 60695–2-10,11,12, etc.

Products from same category

Short-time Overcurrent Test Equipment is used to measure and analyze the influence of short-time overcurrents on energy meter.
Short Time Over Current Tester
The test kit is used to test the influence of supply dip on energy meter, after which the meter is tested for usual tests and the results are compared with previous one
Influence of Supply Voltage
5. Short Circuit Test Setup per IS 15884.png
Short Circuit Test Setup for Prepayment Energy Meters as per IS 15884, 2010