The Comparative Tracking Index Tester is used to test the resistance to tracking of solid insulators or parts of insulators used in electrical appliances and accessories. This test is mandatory for manufacturers of most of the electrical products such as circuit breakers, meters, switches, sockets, plugs, starter holders, connectors, etc.
Built in electrolyte container with pump, producing drops of 20 + 3 mm3 volume at precise interval of 30 seconds. The drop falling height is adjustable to 35 mm.
Priming facility for the pump to enable removal of initial electrolyte having higher concentration.
Fully automatic unit with minimum of controls & adjustments.
Micro-controller based timer control unit used to set the timings and to control the sequence of operations.
Pre-set load on the electrodes with a force of 1.0 N each.
Short circuit release – 0.5 A for 2 sec; Short circuit current limited to 1 A.
Electrode Voltage Settings – 0 to 230V, 0 to 350V, 0 to 450V, 0 to 550V, 0 to 650V adjustable.Current limiting resistances automatically selected with test voltage.
Adjustable platform with glass top for Placing the sample.
Clear acrylic front cover for safety and a draught free surrounding.
Cover open interlock switch for safety. Exhaust fans for removal of fumes.
Test Voltage : 100 to 600V (or 1200 V) AC
Short Circuit Current :1 A
Trip Current : 0.5 A, Adjustable
Voltage Indication : 1/ 8 DIN, 3 Digit Voltmeter, 0 to 750 V
Dropping Unit : Automatic by special positive displacement pump
Dropping Interval : 30 +/-, Seconds
Drop Volume : 20, (-0/=5) MM Cube
Drop Number Indication : Pre-set digital Counter, 0 to 999 drops.
Dropping Height : < 40mm
Electrolyte 0.1% Nh4CL (Ammonium Chloride) in distilled water
Load On Each Electrode : 1.0 Newton
Electrode : Brass (Option = Platinum)
Max. Fuse Rating : 3A Rapid, 20*5 mm Glass Cartridges
Weight : 45Kgs. Approx. (total)
Dimensions (W*H*D) : 450mm*280mm*400mm Electrical Control Panel. 450mm*235mm*200mm, Test Chamber - Approximate
Input Voltage Specification : 230V / 50 Hz – As per Customer’s Specification
The product can be customized as PC based or microcontroller based. In addition, the user can select maximum voltage range - 600 V or 1200 V. Also, the customer may choose the type of electrodes - brass or platinum plated electrodes as per the budget / standard specifications
The product is typically used to asses the tracking characteristics of an insulator due to liquid impurities that create conducting paths along the insulator surface