The Glow Wire Test Apparatus is designed with goal of improved repeatability of test results and ease of operation

Glow Wire Test Apparatus (IS 15885 CL. 18)

Lab Test

GLOW WIRE TESTER (also known as Glow Wire Test Apparatus) is designed to carry out fire hazard testing as specified in IEC 60695-2-10 2000-10. Flammability test is to check the ‘Resistance to Fire’ of electrical insulators that touch directly conducting parts & also parts of insulators. This test is also referred in many other standards such as IS 11000, IS 3854 : 1997 / IS 1293 :1988 / IS 371 :1999 & IS 11000 Pt 2 Sec 1, IEC 60335, IEC 884/94, IEC 60598, IEC 61058, BS 6458, BS EN 60695–2-10,11,12, etc.

Products from same category

The product is designed to test all the relevant safety and performance tests of the LED and its components. It is equipped with output terminal plates for all the three components - LED driver, lighting PCB and complete LED luminaire
PC Based Comprehensive Test Set Up For Luminaires
A time saver, the PC based test setup for LED luminaires has separate terminals to connect the LED PCB, LED Driver and final luminaire
PC-Based-Test-Setup-for-LED-Driver-with-Servo-Controlled-Source
The test equipment is a solution for manufacturers & OEMs to test the LED assembly (that is fitted inside LED Luminary for illumination) on manufacturing line.
PC-Based-Safety-Test-Panel-for-LED-Luminaire-with-Solid-State-Source
The tester helps for assessing the safety and measurement parameters of the LED luminaire MCPCB
PC Based Test Setup for LED PCB of Luminaire
This innovative machine is used to test the driver one by one. The 4+4 LED driver test panel gets automatically cut off at high voltage
4+4 Led Driver Test Panel
This is SCR Elektronik's single phase impulse winding tester
Impulse-Tester-10,700mfd
The product tests the susceptibility of the insulation material against piercing metallic parts when subjected to fire
Needle-Flame-Test-Apparatus
This High Voltage Tester can be used to test the voltage in LED equipments
High-Voltage-Tester-5kV
The tester is used to measure the voltage drop of the earthing circuit at a constant current - thus assessing how well the product eart is 'bounded' to the system earthing
Earth Contact Resistance
The tester is used to measure the rise / increment of the temperature of various parts / components of the device under test when subjected to rated electrical parameters
Temperature-Rise-Test-Setup-for-LED1
The tester is used to assess the effect of ball pressure typically on insulator surfaces in a hot environment
Ball-Pressure-Test-Apparatus
The product is used to test switchgears, wiring accessories and domestic appliances against electric shock during human handling
Test Finger Apparatus