It is a programmable High Voltage Tester for MCB equipments

High Voltage Tester (IEC 60898-1 Clause No. 9.9)

Routine Test Lab Test

The High voltage tester for routine testing of MCBs combines a conventional high voltage tester with a specially designed robust fixture to hold 20 single pole MCBs at a time. The solution comes as a single trolley with easy-to-set test parameters with safety interlocks designed for user safety with respect to electric shock and mechanical fixturing. An advantage of the system is – it gives a high yield (20 MCBs are tested in about one minute) thus yielding user safety at a high value for money.

Products From Same Category

The MCB Thermal Trip Calibration Test Bench is a fully automatic stand alone equipment
4 Station Thermal & Calibration Test Bench
This is designed for Testing of MCB to carry out “Test of Instantaneous Tripping
MCB Magnetic (Instantaneous) Trip Test Bench
The 28 days Test Bench can work in single as well as three phase mode
3-Phase-28-Days Temp-Rise-Test
The test bench tests mechanical and electrical endurance characteristics of MCB for quality assessment purposes
MCB Endurance Test Bench
The test is intended to check the instantaneous trip (magnetic trip mechanism) characteristics of an MCB as per its rating and curve at a conveniently low voltage
MCB-Instantaneous-Trip-Test-Bench
The test, similar to that of an MCB, is carried out to measure the power loss across each pole
MCB Temperature Rise and Power Loss Test Bench
The tester is used to carry out the 1.13 and 1.45 test, optionally inside a heated environment (temperature chamber)
MCB Tripping Current Characteristic Test Bench
The test bench is primarily designed to hold and connect multi pole MCBs for thermal verification
MCB-Thermal-Calibration-Verification-Test-Bench
This product is used by leading MCB manufacturers on their lab & production floor
PC-Based-Thermal-+-Magnetic-Test-Bench-for-MCB
Glow Wire Test Apparatus – GWT A2 (Automatic)
Glow Wire Test Apparatus – GWT A2 (Automatic)
The tester is used to simulate a particular impulse (1.2 / 50 microsecond) so as to assess the insulation characteristics of a breaker against a real world impulse experienced by the MCCB
Impulse Tester 10,700mfd
The product is used to measure the millivolt drop at a high dc voltage or to assess the micro-ohms of an MCB
millivolt drop tester